N74F5074D,602
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F5074 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 120MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 30mA |
| Current - Output High, Low | 15mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 6.5 ns |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 90000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
N74F5074D,602 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. The Tubepackage contains it. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. D-Typeis the type of this D latch. JK flip flop belongs to the 74Fseries of FPGAs. There should be no greater frequency than 120MHzon its output. D latch consists of 2 elements. During its operation, it consumes 30mA quiescent energy. Currently, there are 14 terminations. You can search similar parts based on 74F5074. A voltage of 5V provides power to the D latch. In this case, the D flip flop belongs to the F/FASTfamily. There is a FF/Latchesbase part number assigned to the RS flip flops. 5.5Vis the maximum supply voltage (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. In order for the device to operate, it requires 5V power supplies.
N74F5074D,602 Features
Tube package
74F series
5V power supplies
N74F5074D,602 Applications
There are a lot of NXP USA Inc. N74F5074D,602 Flip Flops applications.
- Counters
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
- Single Down Count-Control Line
- Control circuits
- Bounce elimination switch
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
- Communications
- Storage registers