N74F273AD,602
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 170MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 38mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.02 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 43mA |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
N74F273AD,602 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. A package named Tubeincludes it. T flip flop uses Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Temperature is set to 0°C~70°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74F series. You should not exceed 170MHzin its output frequency. D latch consists of 1 elements. T flip flop consumes 38mA quiescent energy. Terminations are 20. The object belongs to the 74F273 family. It is powered by a voltage of 5V . It belongs to the family of electronic devices known as F/FAST. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. A normal operating voltage (Vsup) should remain above 4.5V. It runs on 5Vvolts of power.
N74F273AD,602 Features
Tube package
74F series
5V power supplies
N74F273AD,602 Applications
There are a lot of NXP USA Inc. N74F273AD,602 Flip Flops applications.
- Balanced 24 mA output drivers
- Automotive
- Counters
- Count Modes
- Guaranteed simultaneous switching noise level
- Shift registers
- Data Synchronizers
- Asynchronous counter
- Communications
- Frequency Divider circuits