MSP430F437IPN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MSP430x4xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Pin Count | 80 |
| Interface | SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 48 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 16 |
| Core Processor | MSP430 |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 + 256B |
| Connectivity | SPI, UART/USART |
| Supply Current-Max | 0.56mA |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 16b |
| DAC Channels | NO |
| Density | 256 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of A/D Converters | 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 1 |
| Number of UART Channels | 1 |
| Number of Serial I/Os | 1 |
| Number of Timers | 7 |
| Number of PWM Channels | 3 |
| Number of SPI Channels | 2 |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MSP430F437IPN Overview
This Microcontroller comes in a 80-LQFP package. The MCU has 48 I/O ports. The Mounting Type of the Microcontroller is Surface Mount. Microcontroller is based on the 16-Bit core architecture. There is a memory type of FLASH in its program memory. Temperatures in this range are operated by this Microcontroller. MSP430x4xx series components belong to this electrical component. 32KB 32K x 8 + 256B is the size of its program memory. There's a MSP430 Core Processor inside. MICROCONTROLLER, RISC uPs, uCs, and peripheral ICs make up the Microcontroller. This chip has a total of 80 terminations on MCU chip. 16-bits are used for its size. IC Chip has 3V volt supply outputs. The Microcontroller chip has NO DMA channels. The part owns 32kB memory size. Performing well when operated at frequency 8MHz can be achieved. Located on the chip are 80 pins. A total of 80 pins are present. The device has 1 UART channels. It has a set of 8 A/D converters on board the device. An entire chip has 16 bits. An 3-channel PWM controller is used by the device. It is designed with 1 serial inputs and outputs (I/Os). There are 7 bits on a Integrated Circuit chip.
MSP430F437IPN Features
MSP430x4xx series
80 Terminals
Based on the 16-Bit
Comes with 80 Pins
MSP430F437IPN Applications
There are a lot of Texas Instruments MSP430F437IPN Microcontroller applications. MSP430F437IPN MCU is usually applied for Measurement and control field, Consumer electronics products, Network communication, mobile communication, Office automation equipment and computer peripherals, Industrial control Instrumentation and process control, Agriculture, transportation, Navigation control, Network application, Metering & measurement, Day to day life, Safety, Medical instruments and Automobile industry.
Electromechanical control
Home appliances
Communication
Xbox
DCS control intelligent sensor
Dryers
Equipment control
Projectors
Removable disks
Fire alarms