MPY534TD
| Parameters | |
|---|---|
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 1996 |
| Series | MPY |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-CDIP-T14 |
| Function | Analog Multiplier |
| Qualification Status | COMMERCIAL |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 20V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 8V |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Neg Supply Voltage-Min (Vsup) | -8V |
| Positive Input Voltage-Max | 12V |
| Negative Input Voltage-Max | -12V |
| Number of Bits/Stages | 4-Quadrant |
| Height Seated (Max) | 4.45mm |
| Length | 18.545mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MPY534TD Overview
This product is packaged with Tube.A cost-effective solution has been embedded in the 14-CDIP (0.300, 7.62mm) package.Frequently, 4-Quadrant bits per stage are used.A voltage of 15V is used for its operation.This device is supplied with a nominally negative voltage of -15V.It is occupied by a modulated radio-frequency signal in the frequency range 3MHz.There are 14 terminations designed to prevent signals from reflecting off the end of the transmission line.As a result of the component with the lowest tolerance for high temperatures, the reflow temperature limit of NOT SPECIFIED has been established.In this case, 125°C is the maximum allowable operating temperature.For normal operation, the maximum supply voltage is kept at 20V.The allowable minimum operating temperature is maintained at -55°C.The part is a well-known member of the MPY series that is used in a wide range of applications.
MPY534TD Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 3MHz
MPY534TD Applications
There are a lot of Rochester Electronics, LLC MPY534TD Analog Multipliers & Dividers applications.
- High-frequency data acquisition systems
- single/dual op amp sum and difference circuits
- Cinema or auditorium audio system
- Strain gauges
- Power control
- Displayers for aircraft and air transportation control systems
- Proportional operation circuits
- RF cable systems
- Ultrasound transducers
- Television broadcasting equipment