MPY100SG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| Series | MPY |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Analog Computational Functions |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | MPY100 |
| Function | Analog Multiplier/Divider |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Number of Circuits | 4 |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Nominal Supply Current | 5.5mA |
| Bandwidth | 0.55MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 8.5V |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
MPY100SG Overview
In order to package it, Tube are used.A cost-effective solution has been embedded in the 14-CDIP (0.300, 7.62mm) package.There is a common practice of using 4-Quadrant bits per stage.A voltage of 15V is used for its operation.There is a nominal negative supply voltage of -15V.The frequency range of 0.55MHz is occupied by a modulated radio-frequency signal.In order to prevent signals from reflecting off the end of the transmission line, 14 terminations are installed.Based on its base part number MPY100, an array of electronic parts with a number of similarities can be found.Known for its superior performance and high quality, it is a type of 14-pin electronic component.In the subcategory of Analog Computational Functions, it can be found as an electronic device.To mount it on the PCB, Through Hole is used.Ideally, the electronic device should operate at a temperature of 125°C.A minimum temperature of -55°C should be maintained for the operation of the electronic device.Dual supply voltages should be higher than 8.5V.The dual supply voltage should be lower than 20V.The type of IC ANALOG MULTIPLIER OR DIVIDER is analog.The unit is powered by a dual supply voltage of 15V.An element 1 is incorporated into it.4 circuits are used to achieve the specific functions of the device.An integral part of the MPY series, it is widely used in a variety of industrial and commercial applications.
MPY100SG Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 0.55MHz
MPY100SG Applications
There are a lot of Texas Instruments MPY100SG Analog Multipliers & Dividers applications.
- Fission chambers
- Radar
- Test equipment
- ECG equipment
- Proportional operation circuits
- PDA
- pH (acidity)
- Portable docking station
- Automatic control
- Addition and subtraction operation circuits