MPQ2483DQ-AEC1-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-QFN (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Automotive, Backlight, Lighting |
| Frequency | 1.35MHz |
| Number of Outputs | 1 |
| Max Output Current | 2.5A |
| Number of Channels | 1 |
| Max Supply Voltage | 55V |
| Output Current | 2.5A |
| Max Supply Current | 800μA |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 55V |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 1.35MHz |
| Voltage - Supply (Max) | 55V |
| Voltage - Supply (Min) | 4.5V |
| Nominal Input Voltage (DC) | 12V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MPQ2483DQ-AEC1-LF-P Overview
Additionally, there is a 10-VFDFN Exposed Pad package for saving space.LED drivers designed using this technology use 1 outputs.For mounting, it uses the Surface Mount method.It emergys as a DC DC Regulator with high efficiency and reliable performance.-40°C~125°C TJ is a valid operating temperature for the led driver.The benefits are considerable for Automotive, Backlight, Lighting.A frequency of 1.35MHz is used as the basis for operation.The LED light driver is configured with a base of 0 pins.Undetermined failures can occur if the voltage supply is below 4.5V.The mount is on its way to Surface Mount.It is acceptable to operate with a supply voltage of 55V.This device is optimized to deliver a maximum voltage level of 55V.A minimal input voltage of 4.5V is required for it to operate.In terms of supply current, there is a maximum value of 55V.When the maximum supply current is below 800μA, the device can deliver high efficiency.An operating temperature above 125°C should ensure stable operation.The load is capable of receiving 2.5A current.Stable operation requires a temperature higher than -40°C.Having the switching frequency at 1.35MHz enables this electronic component to perform at its best.At maximum output current 2.5A, it will deliver all the benefits of a LED driver.Several applications make use of this LED driver from the Automotive, AEC-Q100 series.It is currently possible to transmit over 1 channels.
MPQ2483DQ-AEC1-LF-P Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1.35MHz
Switching frequency of 1.35MHz
MPQ2483DQ-AEC1-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MPQ2483DQ-AEC1-LF-P LED Driver ICs applications.
- Other Electronic Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- Portable lighting
- Amusement Machines
- High-end retail lighting