MPC875CVR66
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | MPC8xx |
| JESD-609 Code | e1 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC875 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 66MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
MPC875CVR66 Overview
Since the microprocessor is packed in 256-BBGA, shipping overseas is convenient. High reliability is achieved using advanced packaging method Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Obtain a basic understanding of operating temperature around 0°C. The cpu microprocessor belongs to the MPC8xx series. A total of DRAM RAM controllers are used by this CPU. Featuring HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART interfaces, this microprocessor can better serve you. As far as I/O is concerned, this CPU runs at 3.3V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Using MPC875 will help you find variants of the cpu microprocessor. In total, 256 terminations have been made. With a 1.8V voltage supply, the part should be turned on and run. 32-Bit is its architecture. The maximum supply current is 1.9V. This microprocessor is a typical Microprocessors. With a 32 external data bus width, this CPU has a wide data bus. The datasheet specifies that this CPU microprocessor requires 1.83.3V power supply.
MPC875CVR66 Features
32-Bit Structure
MPC875CVR66 Applications
There are a lot of NXP USA Inc. MPC875CVR66 Microprocessor applications.
- Blenders
- Medical instruments
- Electromechanical control
- Auto-breaking system
- Light sensing & controlling devices
- Automatic staplers
- Sonography (Ultrasound imaging)
- Fabric
- Smart instruments
- Robotic prosthetic limbs