MPC8378EVRANGA
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Package / Case | 689-BBGA Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~125°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | MPC83xx |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 689 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | TIN COPPER/TIN SILVER |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MPC8378 |
| JESD-30 Code | S-PBGA-B689 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Power Supplies | 1.051.8/2.52.5/3.3V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | PowerPC e300c4s |
| Clock Frequency | 66.66MHz |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 10/100/1000Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR, DDR2 |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | DUART, I2C, MMC/SD, PCI, SPI |
| Co-Processors/DSP | Security; SEC 3.0 |
| Security Features | Cryptography, Random Number Generator |
| Height Seated (Max) | 2.46mm |
| Length | 31mm |
| RoHS Status | ROHS3 Compliant |
MPC8378EVRANGA Overview
The embedded microprocessor ships overseas conveniently packed in 689-BBGA Exposed Pad. High reliability can be achieved by using the advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. K0°C~125°C TAw what the operating temperature is around 0°C~125°C TA. In the MPC83xx series, it is found. Core-wise, this CPU has a PowerPC e300c4s processor. The CPU contains DDR, DDR2 RAM controllers. With its DUART, I2C, MMC/SD, PCI, SPI interfaces, this microprocessor will be able to serve you better. In this CPU, I/O is set to 1.8V 2.5V 3.3V. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with MPC8378. In total, there are 689 terminations. Using a 1V voltage supply, you should be able to operate the cpu microprocessor. In terms of architecture, it is a 32-Bit system. Supply current is maximum at 1.05V. Microprocessors is a typical embedded microprocessor. There is a wide width of 32 on the external data bus of this CPU. There is 66.66MHz clock frequency for the microprocessor. The micro processor requires 1.051.8/2.52.5/3.3V power supplies according to the datasheets.
MPC8378EVRANGA Features
PowerPC e300c4s Core
32-Bit Structure
MPC8378EVRANGA Applications
There are a lot of NXP USA Inc. MPC8378EVRANGA Microprocessor applications.
- Medical instruments
- Television
- Blenders
- Industrial instrumentation devices
- Automatic staplers
- Automobile
- Microwave ovens
- Walkie talkies
- 8. Navigation control field
- Current meter