MP8042DF-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.33.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 7.5V~24V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 24V |
| Supply Voltage-Min (Vsup) | 7.5V |
| Number of Channels | 2 |
| Interface | PWM |
| Output Configuration | Half Bridge (2) |
| Output Power | 40W |
| Voltage - Load | 7.5V~24V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Consumer IC Type | AUDIO AMPLIFIER |
| Rds On (Typ) | 150m Ω |
| Load Type | Inductive |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP8042DF-LF-Z Overview
Tape & Reel (TR) is used to package H bridge.In an effort to save money, H bridge is included in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package.In addbridge driverion, 7.5V~24V can be used to improve reliabilbridge drivery.Mounted on Surface Mount.As long as -40°C~125°C TJ operates at the right temperature, motor driver H bridge will operate normally.General Purpose is pretty useful in a variety of applications.On PCBs, Surface Mount mounts H gate.Among full bridges specific characteristics is Status Flag.A transmission line can be terminated at a 20 termination with the H bridge whose characteristic impedance matches the transmission line.20 pins is used as pronged contacts as H bridge ic of a signal interface.At a specified ambient temperature, the maximum load current that the power supply can provide is 5A.This bridge driver functions in part thanks to the 20 pins working together.
MP8042DF-LF-Z Features
Available in 20-TSSOP (0.173, 4.40mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
MP8042DF-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP8042DF-LF-Z Full Bridge Drivers, Half-Bridge Drivers applications.
- High-Current DC-DC Point-of-Load Converters
- VTR
- Bipolar stepper motor
- OA equipments
- Industrial Automation
- CD players
- High current, low profile DC-DC converters
- Audio-visual equipment
- Non-V-Core
- V-Core