MP2452DD-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFDFN Exposed Pad |
| Manufacturer Package Identifier | MP2452DD-LF-P |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 2.3W |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| JESD-30 Code | R-PDSO-N8 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 33V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Output Configuration | Positive |
| Output Power | 2.3W |
| Max Output Voltage | 33V |
| Voltage - Output (Min/Fixed) | 0.794V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 794mV |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.05mm |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
MP2452DD-LF-P Overview
optimized performance is achieved by utilizing the Cut Tape (CT) package in this voltage regulator. As you can see, this harley voltage regulator contains 8 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. Space savings are achieved by placing this voltage regulator in the 8-TFDFN Exposed Pad package. 1 outputs of voltage regulator are configured. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 1MHz switching frequencies. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 0.794V. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. A voltage of 33V volts can be produced by voltage regulator. As a general rule, this voltage regulator 12v should keep its output voltage at least at 794mV. Voltage regulator's maximal output current reaches 1A A to meet the operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 33V. DC-DC switching regulator with supply voltage 36V. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 3.3V V is required. It is able to operate from a maximum supply voltage of 36V, which is suitable for DC DC switching regulator's operation.
MP2452DD-LF-P Features
1 outputs
Operating supply voltage of 36V
MP2452DD-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP2452DD-LF-P Voltage Regulators applications.
- Digital display device
- Computer rooms
- Experimental setup
- SMT equipment
- Flaw detection equipment
- Game consoles
- Printing
- Network technology
- Bending machines
- Plate bending machines