MP2128DT-LF-Z
| Parameters | |
|---|---|
| Output Voltage | 6V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 6V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 6V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2.8MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
MP2128DT-LF-Z Overview
As a result of the use of the Cut Tape (CT) package, the performance of this voltage regulator is optimized. As you can see, this harley voltage regulator contains 5 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. For space-saving purposes, this voltage regulator is available in the SC-74A, SOT-753 package. The voltage regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mount switching regulator. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 2.8MHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 2.5V is required for this voltage regulator to operate. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.6V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. Voltage can be produced at 6V volts by voltage regulator. To operate the voltage regulator 12v, 5 pins are required. In order for this switching regulator to work properly, the output voltage should be at least 600mVV. A maximum output current of 1A A is provided to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 6V. This DC-DC switching regulator operates from a supply voltage of 6V.
MP2128DT-LF-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
Operating supply voltage of 6V
MP2128DT-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2128DT-LF-Z Voltage Regulators applications.
- Program control systems
- Access control systems
- SMT equipment
- Combined machine tools
- Servo drive system
- Surface processing equipment
- Linear guide
- Electrical distribution systems
- Grinders
- Computed tomography (CT)