MP2109DQ-LF-Z
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-XDSO-N10 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Efficiency | 95 % |
| Output Voltage | 6V |
| Output Type | Adjustable |
| Operating Supply Voltage | 6V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 800mA |
| Max Output Voltage | 6V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.24MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
MP2109DQ-LF-Z Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. There are 10 terminations in this voltage regulator. There are two types of analog ICs on this voltage regulator. The first type is a DUAL SWITCHING CONTROLLER-type IC. This harley voltage regulator is available in the 10-VFDFN Exposed Pad package for the purpose of space saving. The voltage regulator 12v has 2 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. Surface Mount-mounting is compatible with this switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. DC-DC switching regulators reach 1.24MHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 2.5V is required for this voltage regulator to operate. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.6V. This voltage regulator 12v offers maximum design flexibility with an output current of 800mA. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. Voltage can be produced at 6V volts by voltage regulator. Ideally this switch regulator should have an output voltage of about 600mV at the very least. A maximum voltage of 6V can be obtained from the regulator voltage. With 6V as the supply voltage, this DC-DC switching regulator will operate.
MP2109DQ-LF-Z Features
2 outputs
Peak reflow temperature (Cel) of 260
Operating supply voltage of 6V
MP2109DQ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2109DQ-LF-Z Voltage Regulators applications.
- Scientific research
- Laboratories
- ATMs
- Energy management systems
- Wide-range voltage regulation circuits
- Large fire protection systems
- Plate bending machines
- Pipe bending machines
- CMM
- Handheld GPS