MP020-5GS-Z
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 6.6V~28V |
| Topology | Flyback |
| Min Input Voltage | 6.6V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Output Current-Max | 0.395A |
| Frequency - Switching | 120Hz~75kHz |
| Max Input Voltage | 6.6V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Circuit, Over Load, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 17.3V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP020-5GS-Z Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tape & Reel (TR) case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.When the switching frequency reaches 120Hz~75kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 6.6V~28V , the AC/DC converter may be used.In total, it has 7 terminations.On this ac/dc converter, there are 7 pins.There are a total of 8/7 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .A total of 1 outputs are available for processing.The maximum current that can be supplied to the ac to dc inverter is 0.395A .The AC to DC converter can be powered under 6.6V voltage.A voltage of less than 6.6V V can be used with the AC to DC inverter.The interface IC conducts when the supply voltage is 28V .
MP020-5GS-Z Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 120Hz~75kHz
With 7 pins
Operating Supply Voltage at the range of 28V
MP020-5GS-Z Applications
There are a lot of Monolithic Power Systems Inc. MP020-5GS-Z AC DC Converters applications.
- Battery Chargers
- Z-Wave
- Lighting controls
- Battery chargers for cellular phones
- AC/DC Adaptors/Chargers for Cordless Phone
- Automotive Telematics
- Tablets
- AC--DC Adapter
- Air conditioners
- MP3