MM74HCT374WM
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.2mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 46 ns |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2.34mm |
| Length | 13mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
MM74HCT374WM Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74HCTseries of FPGAs. It should not exceed 30MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 8μA of quiescent current without being affected by external factors. 20terminations have occurred. The 74HCT374 family contains this object. An input voltage of 5Vpowers the D latch. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HCTfamily of devices. It is mounted in the way of Surface Mount. It is designed with 20 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 8bits. The system runs on a power supply of 5V watts. This D flip flop is equipped with 0 ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 7.2mA, it is possible to design the device in any way you want. There are 3 output lines on it. Currently, there are 8 channels available.
MM74HCT374WM Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT374WM Applications
There are a lot of ON Semiconductor MM74HCT374WM Flip Flops applications.
- High Performance Logic for test systems
- Single Down Count-Control Line
- Single Up Count-Control Line
- Parallel data storage
- Supports Live Insertion
- Instrumentation
- Frequency Divider circuits
- Dynamic threshold performance
- Data Synchronizers
- Guaranteed simultaneous switching noise level