MM74HC595MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 40 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Number of Inputs | 5 |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| fmax-Min | 30 MHz |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC595MTCX Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. 16 is the number of terminations on the chip. It is used to pack in Tape & Reel (TR) case. The part operates at 4.5V voltage. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount. Electronic components fall under the category of HC/UH. Mounted in the same way as Surface Mount. -40°C~85°C is the range of operating temperatures for the device. There is a voltage supply within 2V~6V. In this case, the electrical component belongs to the series 74HC. If you use the 74HC595 family, you can find parts that are similar. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED. There should be no less than 2V supply voltage (Vsup) for this part. As far as the device is concerned, there are 1 input lines available. A voltage of 2/6V can be delivered by it. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. There are 9 output lines to operate.
MM74HC595MTCX Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
It supplies 2/6V power
With 9 output lines
MM74HC595MTCX Applications
There are a lot of ON Semiconductor MM74HC595MTCX Shift Registers applications.
- Cache memory in CPU
- Parallel to serial converter
- Pattern Recognizers
- Data Format Converters
- LED matrix control
- Data manipulation
- Data Processors
- Parallel data
- data manipulation
- Remote control holding register