MM74HC374N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.26g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Output Current | 7.8mA |
| Clock Frequency | 35MHz |
| Propagation Delay | 230 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 40ns @ 6V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HC374N Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. It is contained within the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A voltage of 2V~6Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74HC series. There should be no greater frequency than 35MHzon its output. D latch consists of 1 elements. As a result, it consumes 8μA quiescent current. The 74HC374 family contains this object. This T flip flop has a capacitance of 5pF farads at the input. Through Hole mounts this electronic component. As you can see from the design, it has pins with 20. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. In order to achieve its superior flexibility, 8 circuits are used. Its output current of 7.8mAallows for maximum design flexibility. It has 3 output lines to operate.
MM74HC374N Features
Tube package
74HC series
20 pins
MM74HC374N Applications
There are a lot of ON Semiconductor MM74HC374N Flip Flops applications.
- Cold spare funcion
- EMI reduction circuitry
- Dynamic threshold performance
- Storage registers
- Test & Measurement
- Digital electronics systems
- Latch
- Reduced system switching noise
- Matched Rise and Fall
- Frequency Dividers