MM74HC174SJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 31MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 50 MHz |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
MM74HC174SJ Overview
16-SOIC (0.209, 5.30mm Width)is the packaging method. You can find it in the Tubepackage. As configured, the output uses Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HC series. There should be no greater frequency than 31MHzon its output. A total of 1elements are present in it. There is 8μA quiescent consumption. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This T flip flop has a capacitance of 5pF farads at the input. In this case, the D flip flop belongs to the HC/UHfamily. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be kept above 2V for normal operation.
MM74HC174SJ Features
Tube package
74HC series
MM74HC174SJ Applications
There are a lot of Rochester Electronics, LLC MM74HC174SJ Flip Flops applications.
- Asynchronous counter
- Counters
- Test & Measurement
- Single Down Count-Control Line
- ESD performance
- 2 – Bit synchronous counter
- ESD protection
- Data Synchronizers
- Guaranteed simultaneous switching noise level
- Patented noise