MM74HC174MX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 31MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| fmax-Min | 24 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MM74HC174MX Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. You can find it in the Tape & Reel (TR)package. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. FPGAs belonging to the 74HCseries contain this type of chip. This D flip flop should not have a frequency greater than 31MHz. D latch consists of 1 elements. T flip flop consumes 8μA quiescent energy. A total of 16 terminations have been made. The power supply voltage is 5V. Its input capacitance is 5pF farads. It belongs to the family of electronic devices known as HC/UH. As soon as 6Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.
MM74HC174MX Features
Tape & Reel (TR) package
74HC series
MM74HC174MX Applications
There are a lot of Rochester Electronics, LLC MM74HC174MX Flip Flops applications.
- ESCC
- Data transfer
- Bus hold
- Registers
- Storage registers
- Guaranteed simultaneous switching noise level
- Shift Registers
- Test & Measurement
- Common Clocks
- Safety Clamp