MM74HC138M
| Parameters | |
|---|---|
| Factory Lead Time | 51 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 143mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC138 |
| Number of Outputs | 8 |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 600mW |
| Propagation Delay | 252 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 252 ns |
| Family | HC/UH |
| Logic Function | Decoder |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 50 ns |
| Voltage Supply Source | Single Supply |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC138M Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.Mounting is performed using Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74HC series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number of 74HC138 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.As the end of conductors, it uses GULL WING.There is a type of supply of Single.It is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.It is provided that 2/6V has a power supply in order to function normally.The turn signal switch has 8 outputs.It consumes 8μA current of multiplexer ic without external influences.This multiplexer provides 3 inputs.In the mux switch configuration, there are 1 elements.
MM74HC138M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
MM74HC138M Applications
There are a lot of ON Semiconductor MM74HC138M Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Automation system
- Microprocessor memory systems
- Seven segment displays
- Home automation system
- Logic circuits
- Code conversion
- Speed synchronization of multiple motors in industries
- RF-based home automation system
- D/A converters