MIC95410YFL-TR
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-PowerVFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 9.9mOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MIC95410 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Max (Vsup) | 9V |
| Interface | On/Off |
| Operating Supply Current | 200μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 300μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 300 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~9V |
| Rds On (Typ) | 6.6m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.9mm |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC95410YFL-TR Overview
The LED driver's packaged as a Tape & Reel (TR).In the 10-PowerVFQFN package, it is included.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.The MIC95410 family contains this object.It has a total of 10 terminations.For operation, 10 pins are used.Currently, the lighting driver has a total of 1 functions.With a supply voltage of 5V, high efficiency is possible.In this case, there is 9.9mOhm resistance in the LED driving board.The lighting driver is configured to have a maximum supply voltage of 9V (Vsup).In order to maximize efficiency, the supply voltage should be set to 5.5V.A maximum current requirement of 300μA is required for its operation.
MIC95410YFL-TR Features
Supplied from 5V
Resistance of 9.9mOhm
MIC95410YFL-TR Applications
There are a lot of Microchip Technology MIC95410YFL-TR Power Switches ICs applications.
- Various applications equipped with buttons
- Notebook PC
- Portable GPS Device
- Hot Swap
- USB Power Distribution
- Portable Video Game Players
- PC Cards
- HDD, SSD
- Solid-State Drives
- Notebook and Tablet Computers