MIC7122YMM
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | MM8™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC7122 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 900μA |
| Current - Supply | 900μA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~15V ±1.1V~7.5V |
| Output Current per Channel | 250mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 420kHz |
| Voltage - Input Offset | 500μV |
| Current - Output / Channel | 250mA |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC7122YMM Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. An 8-pin op amp ic is included in the package. There is an input offset voltage of 500μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 900μA . This op amp ic has 2 circuits. Instrumentation amplifier has 2 channels on it. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The temperature should not be lower than -40°C for operational amplifier ics to operate. A temperature greater than 85°C should not be used for the operation of this instrumentation amplifier. We recommend that you use this electronic part with an 900μA supply in order to get the best performance from it. The MM8? represents the op amp's series number.
MIC7122YMM Features
Output Type: Rail-to-Rail
MIC7122YMM Applications
There are a lot of Microchip Technology MIC7122YMM Instrumentational OP Amps applications.
- Video computer boards
- Inverse/same-phase proportional circuit
- Gaming industry
- Division circuits
- High/low-pass filter circuit
- High speed sample
- ECG equipment
- Subtraction operation circuits
- Thermocouples
- Automotive sensors