MIC4832YMM
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| Type | EL Lamp Driver |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.8V~5.5V |
| Frequency | 60Hz~1kHz |
| Base Part Number | MIC4832 |
| Number of Outputs | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 45μA |
| Nominal Supply Current | 45μA |
| Max Supply Current | 75μA |
| Current - Supply | 45μA |
| Dimming | No |
| Number of Segments | 1 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC4832YMM Overview
Materials used in packaging are those of Tube.Manufacturers of electronic devices recogni8-TSSOP, 8-MSOP (0.118, 3.00mm Width)e the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)'s low packaging cost.The PCB is mounted by using Surface Mount.Type EL Lamp Driver applies to standard grade applications.In order to ensure its proper operation, a power supply voltage is supplied to it.In all cases, -40°C~85°C should be operated.A 60Hz~1kHz frequency can still be operated accurately.In the device, the best part has a number of MIC4832s.In this system, 45μA's supply current is used to power the system.There is a 45μA setting on the device's supply current.The component's pin number remains 8.In the Surface Mount-direction, the mounting is done.The supplier device package for this device is 8-MSOP.Device consists of 1 segments.The temperature should be warmer than -40°C when the device is operating.There is a maximum operating temperature of 85°C at this time.The maximum supply temperature it can handle is 75μA.Supply voltages of 5.5V are the only ones compatible with it.It is common to see outputs that are 2.It requires an input voltage of 1.8V volts to operate.
MIC4832YMM Features
Mounting type of Surface Mount
Maximum temperature of -40°C
2 outputs
MIC4832YMM Applications
There are a lot of Microchip Technology MIC4832YMM Lighting Controllers applications.
- Server motherboards
- DC/DC, DC/AC, and AC/AC converters
- Flashtube ignition
- Power factor correction (PFC)
- Spot welding
- To enhance power efficiency
- UPS buffering
- Coupling or blocking
- Motor control
- Audio crossover