MIC4428YMM

MIC4428YMM

Surface Mount Tube Active Gate Drivers ICs Inverting, Non-Inverting 2 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) MIC4428 Low-Side


  • Manufacturer: Microchip Technology
  • Origchip NO: 536-MIC4428YMM
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 168
  • Description: Surface Mount Tube Active Gate Drivers ICs Inverting, Non-Inverting 2 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) MIC4428 Low-Side (Kg)

Details

Tags

Parameters
Factory Lead Time 7 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Supplier Device Package 8-MSOP
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 4.5V~18V
Base Part Number MIC4428
Number of Outputs 2
Max Output Current 1.5A
Max Supply Voltage 18V
Min Supply Voltage 4.5V
Nominal Supply Current 1.5mA
Output Current 1.5A
Propagation Delay 50 ns
Input Type Inverting, Non-Inverting
Turn On Delay Time 50 ns
Rise Time 30ns
Fall Time (Typ) 20 ns
Rise / Fall Time (Typ) 20ns 29ns
Channel Type Independent
Number of Drivers 2
Driven Configuration Low-Side
Gate Type N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink) 1.5A 1.5A
Logic Voltage - VIL, VIH 0.8V 2.4V
Height 900μm
Length 3.1mm
Width 3.05mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC4428YMM Overview


There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Gate drivers is packaged in the way of Tube.Configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.There are numerous related parts listed under its base part number MIC4428.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.There is a maximum output current of 1.5A.Based on its basis, it integrates 2 outputs.This device supports a current output of 1.5A at the output.The allowable maximum value of operating temperature is 85°C.-40°C is the minimum operating temperature.During operation, the supply voltage of 18V is its maximum value.Its minimum operating voltage is 4.5V.

MIC4428YMM Features


Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins

MIC4428YMM Applications


There are a lot of Microchip Technology MIC4428YMM gate drivers applications.

  • Line drivers
  • Active filtering
  • Portable Navigation Devices
  • 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
  • 3-Phase Motor Inverter Driver
  • Broadcast equipment
  • Isolated Supplies for controller area network (CAN),
  • RGB applications
  • Commercial air-conditioning (CAC)
  • Portable computers

Write a review

Note: HTML is not translated!
    Bad           Good