MIC2595-2YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Latched Fault |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Hot Swap Controller, Sequencer |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | -48V |
| Voltage - Supply | -80V~-19V |
| Depth | 3.9mm |
| Base Part Number | MIC2595 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | -80V |
| Min Supply Voltage | -19V |
| Operating Supply Current | 4mA |
| Current - Supply | 4mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, UVLO |
| Feature Pins | CFILTER, CNLD, DRAIN, PGTIMER, OFF, ON, /PWRGD1, /PWRGD2, /PWRGD3 |
| Length | 8.64mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2595-2YM-TR Overview
The 14-SOIC (0.154, 3.90mm Width) package includes it.Channel 1 is currently available.In the form of a Tape & Reel (TR), it is packaged.This is set up in the same way as Surface Mount.The electrical component in question falls into the classification Hot Swap Controller, Sequencer.A temperature setting of -40°C~85°C will ensure reliable operation.There are -48V applications on the device.In Latched Fault, it is featured.If the power source is -80V~-19VV, it should work fine.This number is a member of the MIC2595 family.A 14 pin is used for operation.Its programmable features are Current Limit, Fault Timeout, UVLO.Presently, there is a sufficient supply of 4mA.Surface Mount directs its position.In order to ensure stable operation, a maximum operating temperature of 85°C°C must be set.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.Hot Swap is defaulted to output 1.A maximum voltage of -80VV can be supplied to it.If necessary, it can work with a low supply voltage, such as -19VV.4mA is the operative supply current.
MIC2595-2YM-TR Features
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, UVLO
MIC2595-2YM-TR Applications
There are a lot of Microchip Technology MIC2595-2YM-TR hot swap controllers applications.
- Telecom server
- Distributed power systems
- High power circuit board
- Industrial
- Firewire
- Circuit power protectors
- Avionics systems
- Network switch
- Undervoltage protection
- Temperature monitor output