MIC2587-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Feature | Latched Fault |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hot Swap Controller |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Voltage - Supply | 10V~80V |
| Depth | 3.94mm |
| Base Part Number | MIC2587 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 80V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Power Dissipation | 319mW |
| Max Supply Current | 5mA |
| Current - Supply | 2mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate, UVLO |
| Feature Pins | FB, ON, /PWRGD, TIMER |
| Length | 4.93mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2587-2YM Overview
There is a 8-SOIC (0.154, 3.90mm Width) package that includes this.As of now, 1 channels are available.The package resembles a Tube.As Surface Mount would say, it's set up like that.An electrical component classified as Hot Swap Controller belongs to this category.The temperature should be set to -40°C~85°C to ensure reliable functioning.General Purpose applications are available on the device.An article about it appears in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 10V~80VV.This number is a member of the MIC2587 family.This device operates by using 8 pins.Current Limit, Fault Timeout, Slew Rate, UVLO features are programmable.In the present, there is a shortage of 2mA.Positioned in direction of Surface Mount, it is at a right angle.The maximum operating temperature of 85°C°C allows for stable operation.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.Hot Swap is set by default to output 1.A maximum supply voltage of 80VV can be handled by it.If necessary, it can work with a low supply voltage, such as 10VV.In this case, 2mA is the operative supply current.Hot Swap requires a maximum current of 5mA to operate.
MIC2587-2YM Features
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, Slew Rate, UVLO
MIC2587-2YM Applications
There are a lot of Microchip Technology MIC2587-2YM hot swap controllers applications.
- Hard drive
- Disconnect faulty loads before supply voltage drops
- Power monitoring
- Firewire
- Circuit breakers for electronic circuits
- Reverse current protection
- Active current limit
- Temperature monitor output
- Safe board insertion and extraction
- Short-circuit protection in real time