MIC2025-1YMM
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2025 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2025-1YMM Overview
As you can see, it's packaged in the way of a Tube.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.Slew Rate Controlled, Status Flag features are available on the lighting driver.The MIC2025 family consists of this type.In order to operate, 8 pins are used.The lighting driver's maximum output is 500mAV.To comply with the operation criteria, the maximum output current is reduced to 500mA.As a result, it is mounted in the manner of Surface Mount.The LED driver has 140mOhm resistance.There is an electrical component included in the MM8? series.In total, there are 1 channels available.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.The maximum operating temperature of 85°C°C allows for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.The greatest supply voltage it can handle is 5.5VV.If required, it can operate at 2.7V volts as well.
MIC2025-1YMM Features
Resistance of 140mOhm
1 channels
MIC2025-1YMM Applications
There are a lot of Microchip Technology MIC2025-1YMM Power Switches ICs applications.
- Notebook PC
- HDD, SSD
- Wearable Devices
- Handheld Devices
- Notebook and Tablet Computers
- USB Ports/Hubs
- USB Power Distribution
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Hot Swaps