| Parameters |
| Factory Lead Time |
7 Weeks |
| Mount |
Surface Mount |
| Mounting Type |
Surface Mount |
| Package / Case |
SOT-23-6 |
| Number of Pins |
6 |
| Supplier Device Package |
SOT-23-6 |
| Operating Temperature |
-40°C~85°C TA |
| Packaging |
Tape & Reel (TR) |
| Feature |
Slew Rate Controlled |
| Part Status |
Active |
| Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
| Termination |
SMD/SMT |
| Resistance |
100MOhm |
| Max Operating Temperature |
85°C |
| Min Operating Temperature |
-40°C |
| Current Rating |
1.2A |
| Base Part Number |
MIC2005 |
| Number of Outputs |
1 |
| Output Voltage |
6V |
| Output Type |
P-Channel |
| Max Output Current |
1.2A |
| Number of Channels |
1 |
| Interface |
On/Off |
| Max Supply Voltage |
5.5V |
| Min Supply Voltage |
2.5V |
| Current - Output (Max) |
1.2A |
| Output Configuration |
High Side |
| Voltage - Supply (Vcc/Vdd) |
Not Required |
| Input Type |
Non-Inverting |
| Switch Type |
General Purpose |
| Max Input Voltage |
5.5V |
| Ratio - Input:Output |
1:1 |
| Voltage - Load |
2.5V~5.5V |
| Fault Protection |
Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) |
70mOhm |
| REACH SVHC |
No SVHC |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Lead Free |
MIC2005-1.2YM6-TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the SOT-23-6 package, it is included.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.It is a member of the MIC2005 family.The operation is performed through the 6 pins.Its maximum output voltage is 1.2AV.To meet the operation criteria, the maximum output current drops to 1.2A.As a result, it is mounted in the manner of Surface Mount.100MOhm is the resistance of the lighting driver.There are a total of 1 available channels.Voltage input is limited to 5.5V volts.Stable operation is possible with a maximum operating temperature of 85°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.It can handle a voltage of 5.5VV as its maximum supply voltage.It can also be used at 2.5Vvolts if needed.
MIC2005-1.2YM6-TR Features
Resistance of 100MOhm
1 channels
MIC2005-1.2YM6-TR Applications
There are a lot of Microchip Technology MIC2005-1.2YM6-TR Power Switches ICs applications.
- Handheld Devices
- Wireless/Networking Cards
- PC Cards
- Wearable Devices
- Hot-Swap Systems
- Storage Drives
- Solid State Drivers
- HDD, SSD
- Portable Devices
- Wireless Headsets