MCP73838-NVI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.35V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73838 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.35V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.5V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP73838-NVI/MF Overview
The package Tube contains it, and you can find it there.There is a 10-VFDFN Exposed Pad package that comes with this item.This device has a mounting type of Surface Mount.A temperature setting of -40°C~85°C TA would be the best thing to do.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Device charging requires Constant - Programmable current.A list of related parts can be found by searching for the base part number MCP73838.There are 10 terminations in it.In total, it has 10 pins.In its maximum charging mode, the part charges at 1.1A.There are 10 pins necessary to make it work.Channels are available in an amount of 1.Batteries with 5.35V can be used to power it.It is important that the supply voltage does not exceed 6V for the device to work properly.Having the output voltage set to 4.35V may result in high efficiency.1.2A is the output current during the operation.This device is a member of subcategory Power Management Circuits.The device can operate at a voltage of 3.75V as low as possible.Amounting is in line with Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.When it comes to the part's power supply, it is set to 5V.It can take a maximum input voltage of 6V volts.This operation requires a voltage of 4.5V as the maximum output supply voltage.
MCP73838-NVI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73838-NVI/MF Applications
There are a lot of Microchip Technology MCP73838-NVI/MF Battery Chargers ICs applications.
- Mobile router
- Drone
- Pallet jacks
- Mobile point-of-sale (mPOS) terminals
- Automotive/electrical vehicle
- Solar charging
- Crosswalk marker lights
- Forklift
- Robot
- Portable devices