MCP73833-FCI/MF
| Parameters | |
|---|---|
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 5 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-DFN (3x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MCP73833 |
| Output Voltage | 4.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Output Current | 1.2A |
| Max Input Voltage | 7V |
| Nominal Input Voltage | 6V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Voltage - Supply (Max) | 6V |
| Programmable Features | Current |
MCP73833-FCI/MF Overview
If you are looking for it in the Tube package, then you have found it.We've included it in the 10-VFDFN Exposed Pad package so that it's easier to use.Mounting type is Surface Mount.A temperature setting of -40°C~85°C TA would be the best thing to do.Charge the device by supplying it with Constant - Programmable current.Based on the base part number MCP73833, it is possible to find related parts for this device.A battery pack is going to have a voltage of 4.2V.A number of programmable features are available, including Current.As long as it is charged at maximum current, it will be rated as 1.1A.The operation?are 10 pins.The number of channels available is 1.In general, it is recommended to use devices with 6V maximum supply voltages.6V supply voltage is not a problem for it.Having the output voltage set to 4.5V may result in high efficiency.During operation, 1.2A represents the output current.It can function at as low a supply voltage as possible, such as 3.75V.Aligning it with Surface Mount is required for mounting.Input voltage is limited to 7V volts.A 10-DFN (3x3) supplier package is associated with the device.The device should be operated at a low temperature of -40°C degrees Celsius to ensure reliability.It is possible to operate safely at a temperature of 85°C°C.
MCP73833-FCI/MF Features
Battery pack voltage of 4.2V
1 channels
10-VFDFN Exposed Pad package
MCP73833-FCI/MF Applications
There are a lot of Microchip Technology MCP73833-FCI/MF Battery Chargers ICs applications.
- Painting boat
- Remote control toys
- Energy harvesting
- Rental fleets
- Fleet management
- Instruments and meters
- Marine buoy lights
- Forklift
- Emergency/Security
- Model aircraft