MCP6V02-E/MD
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6V02 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Nominal Supply Current | 300μA |
| Output Current | 22mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 2μV |
| Gain Bandwidth Product | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 156dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 100kHz |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6V02-E/MD Overview
It is packaged in an 8-VDFN Exposed Pad-case that protects the operational amplifiers from damage. This is a Zero-Drift type op amp. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 2μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You should keep the voltage gain at 156dB for the time being. The buffer amp consists of 2 circuits in total. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A voltage rating of 2 is indicated for the op amp's operating supply voltage.
MCP6V02-E/MD Features
8 Pins
supply voltage of 1.8V
156dB voltage gain
Output Type: Rail-to-Rail
MCP6V02-E/MD Applications
There are a lot of Microchip Technology MCP6V02-E/MD Instrumentational OP Amps applications.
- Medical instruments
- Commercial audio systems
- Automotive sensors
- Division circuits
- Ultrasound transducers
- Tablets
- Portable media players
- Power generator
- Car stereo
- Test and measurement instruments