MCP6L91RT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6L91R |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 850μA |
| Nominal Supply Current | 850μA |
| Output Current | 25mA |
| Slew Rate | 7V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~6V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 105dB |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6L91RT-E/OT Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. Buffer amps of this type are called General Purpose-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 5. A total of 5 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 5 pins. Op amp ic rates 4mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 850μA and 10 . The voltage gain should stay at 105dB. 1 channels are available on the instrumentation amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers.
MCP6L91RT-E/OT Features
5 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
MCP6L91RT-E/OT Applications
There are a lot of Microchip Technology MCP6L91RT-E/OT Instrumentational OP Amps applications.
- Car stereo
- Image computer boards
- Home audio systems
- Band-stop filter
- Active probe
- Vehicle electronics
- pH (acidity)
- Test and measurement instruments
- Switching amplifier
- Signal operation