MCP6562-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6562 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 130μA |
| Output Current | 50mA |
| Max Supply Current | 130μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Turn On Delay Time | 45 ns |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Natural Thermal Resistance | 163 °C/W |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6562-E/SN Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.This chip is designed with the Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.Other Comparator like the device play a important role in the industry.Supplied by 1.8V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.The type of mounting recommended is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 8 pins on the comparator.Search MCP6562 to find more pin-to-pin solutions.There is 130μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 130μA supply current.If the current supply exceeds 130μA , the comparator might be damaged.
MCP6562-E/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6562-E/SN Applications
There are a lot of Microchip Technology MCP6562-E/SN linear comparators applications.
- Mobile Communications
- Mobile Phones
- Factory automation & control
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- Portable and Battery-Powered Systems
- Self-diagnostics
- Power management
- Laptop Computers
- Current and voltage sensing