MCP6549-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6549 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6549-E/ST Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.Electronic comparator is shipped by Tube .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.Electronic comparator has a total of 4 elements.Electronic comparator has 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 14 pins.If you require more pin-to-pin solutions, search MCP6549 for more options.A quiescent current of 1μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.A power supply of 1.6/5.5V is sufficient for the operation of the device.The part can be supplied with a minimum current of 0.001mA .
MCP6549-E/ST Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6549-E/ST Applications
There are a lot of Microchip Technology MCP6549-E/ST linear comparators applications.
- Current and voltage sensing
- Body Control Modules
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones and Tablets
- Metering Systems
- Power Supervision
- Wireless Base Stations
- Battery management and protection
- Hand-Held Electronics