MCP6548-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6548 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 600nA |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6548-E/SN Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.The part will be shipped by Tube .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .A total of 1 elements can be found in it.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator consists of 8 pins.Search MCP6548 to find more pin-to-pin solutions.There is a quiescent current of 1μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 600nA .Input current to the device cannot exceed 1pA .
MCP6548-E/SN Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6548-E/SN Applications
There are a lot of Microchip Technology MCP6548-E/SN linear comparators applications.
- Set Top Boxes
- Portable Battery Monitoring
- Pulse, Squarewave, and Time Delay Generators
- Metering Systems
- Window Comparators
- General-Purpose Portable Devices
- Handheld Instruments
- Wireless Base Stations
- Analog front end
- Mobile Phones and Tablets