MCP6547-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Base Part Number | MCP6547 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 600nA |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6547-E/SN Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a type CMOS, Open-Drain, Rail-to-Rail, TTL output.This package has been designed with Tube .The component belongs to the Comparator family of electrical components.Electronic comparator can be classified as a General Purpose chip.This is a 2 element comparator.The board includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator has 8 pins.Alternatively, you may search for MCP6547 to find more pin-to-pin solutions for your specific needs.A quiescent current of 1μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 600nA .Electronic comparator is possible to input a maximum current of 1pA into the device.
MCP6547-E/SN Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6547-E/SN Applications
There are a lot of Microchip Technology MCP6547-E/SN linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Communications
- Security Detection Systems
- Consumer Medical Electronics
- Point of load regulators
- DC/DC and AC/DC power supplies
- Automotive
- Notebooks and PDAs
- Alarm and Monitoring Circuits
- Power management