MCP6547-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6547 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 206 °C/W |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6547-E/MS Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .The chip is packaged with Tube .There are 8 terminals on the comparator.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.There are 8 pins on this board.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.There are 8 pins on the comparator.In order to find a solution that meets your specific needs, search MCP6547 for more pin-to-pin solutions.This comparator presents a quiescent current of 1μA .The PCB or other board has a Surface Mount for mounting.A power supply of 1.6/5.5V is sufficient for the operation of the device.Input current to the device cannot exceed 1pA .As a minimum current, this part can be powered by 0.001mA .
MCP6547-E/MS Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6547-E/MS Applications
There are a lot of Microchip Technology MCP6547-E/MS linear comparators applications.
- Consumer Medical Electronics
- Appliances
- Hand-Held Electronics
- Window Comparators
- Mobile Phones
- Battery-Powered Electronics
- Analog front end
- Self-diagnostics
- Zero-Crossing Detectors
- Wearable Devices