MCP6546-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6546-E/SN Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a type CMOS, Open-Drain, Rail-to-Rail, TTL output.This device is designed in Tube case.The comparator has a total of 8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A comparator of this type is typically of type General Purpose .In total, it contains 1 elements.There are 8 pins on this board.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MCP6546 .In this comparator, the quiescent current is 1μA .A Surface Mount is provided for mounting on PCBs or other boards.For normal operation, the operating supply voltage must be 5V .
MCP6546-E/SN Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6546-E/SN Applications
There are a lot of Microchip Technology MCP6546-E/SN linear comparators applications.
- Point of load regulators
- Factory automation & control
- Threshold Detectors
- Wireless Base Stations
- Notebooks and PDAs
- Battery-Powered Electronics
- Analog front end
- High-Speed Differential Line Receiver
- Building automation
- Multivibrators and High-Voltage Digital Logic Gates