MCP6542T-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6542 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 206 °C/W |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6542T-E/MS Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.The chip is packaged with Tape & Reel (TR) .The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator is equipped with 8 pins.You may wish to search MCP6542 for more solutions that address your specific needs.There is a quiescent current of 1μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The device can be powered by 1.6/5.5V power supplies.Electronic comparator is possible to input up to 1pA current into the device.This part can be supplied with a maimum current of 0.001mA .
MCP6542T-E/MS Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6542T-E/MS Applications
There are a lot of Microchip Technology MCP6542T-E/MS linear comparators applications.
- Portable Battery Monitoring
- Building automation
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- Laptop Computers
- General-Purpose Portable Devices
- Security Detection Systems
- Automatic Test Equipment
- Notebooks and PDAs
- Battery management and protection