MCP6542-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6542 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 163 °C/W |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6542-E/SN Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .This chip is designed with the Tube package.You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator includes 8 pins.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search MCP6542 for more options.The comparator displays a quiescent current of 1μA .Mounting on PCBs or other boards is easy with the Surface Mount .The device can be operated with 1.6/5.5V power supplies.The maximum current that can be supplied to this part is 0.001mA .
MCP6542-E/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6542-E/SN Applications
There are a lot of Microchip Technology MCP6542-E/SN linear comparators applications.
- Analog front end
- Wireless Base Stations
- Hand-Held Electronics
- General-Purpose, Low-Voltage Applications
- Mobile Communications
- Power Supervision
- Infotainment & cluster
- Point of load regulators
- Mobile Phones
- RC Timers