MCP6474-E/SL
| Parameters | |
|---|---|
| Number of Circuits | 4 |
| Nominal Supply Current | 100μA |
| Output Current | 10mA |
| Slew Rate | 1.1V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~5.5V ±1V~2.75V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 91dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Frequency | 10kHz |
| Height | 1.25mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6474 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
MCP6474-E/SL Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 14 terminations. Please take in mind that this instrumentation amplifier should be run at 3V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . 115dB should remain the voltage gain. There are 4 circuits on this op amp. There are a total of 4 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps.
MCP6474-E/SL Features
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6474-E/SL Applications
There are a lot of Microchip Technology MCP6474-E/SL Instrumentational OP Amps applications.
- RF cable systems
- Broadcasting
- Power control
- Signal operation
- High input resistance broadband
- pH (acidity)
- Digital cameras
- Commercial audio systems
- PDA
- Industrial control system