MCP2004T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | THERMAL SHUTDOWN |
| Voltage - Supply | 6V~27V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP2004 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Current | 90μA |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Differential Output | NO |
| Protocol | LINbus |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 175mV |
| Interface Standard | GENERAL PURPOSE |
| Receive Delay-Max | 6000 ns |
| Transmit Delay-Max | 4000 ns |
| Number of Transmitters | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP2004T-E/SN Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tape & Reel (TR) package contains this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.Power supply requirements for this differential driver are 6V~27V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.Applications with operating temperatures of -40°C~125°C have been designed primarily for this ic receiver.An output voltage range of 12V is sufficient to run this line driver ic efficiently.A package consisting of 8 market standard pinouts is provided with this integrated circuit.This part number MCP2004 can be used to search for more variants based on the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 8-pin.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.It was possible to achieve a 1-bit resolution through this ic receiver.In most cases, the receiver will be specified with a 1-bit resolution.Additionally, this optical transceiver module features the THERMAL SHUTDOWN function, which improves the stability and accuracy of signal management in general.It is capable of driving LEDs with a voltage of 90μA as the input voltage to this integrating circuit.There are 1 transmitters, which is an can transceiver used in telecommunications to produce radio waves in order to transmit or send data with the aid of an antenna. A can transceiver that has a current input of 1mA or greater may be affected by malfunctions.
MCP2004T-E/SN Features
Tape & Reel (TR) package
8 pin count
8 pins
MCP2004T-E/SN Applications
There are a lot of Microchip Technology MCP2004T-E/SN Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- Structural bonding
- Remote controls
- Aircraft navigation
- Desktop PC
- Transmission stations
- Gigabit Ethernet
- Datacom networking applications
- Wireless modems
- Clock radio