MCP14E11-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.12W |
| Voltage - Supply | 4.5V~18V |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MCP14E11 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Element Configuration | Dual |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 1.12W |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Propagation Delay | 65 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 65 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E11-E/P Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the packaging method.Through Hole is mounted in the way of the device.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.Initially, the configuration is composed of 8 terminations.Under its base part number MCP14E11, various related parts can be found.During design, it is configured with 8 pins.Specification is for 12V supply voltage operation.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.As a maximum, there is 3A limit to the output current.Its subcategory of MOSFET Drivers contains various useful electronic components.A board with 8 component pins is available.For its basis, 2 outputs are integrated.The device is capable of delivering a current of 3A.Having the maximum power dissipation of 1.12W indicates its maximum capacity to conduct power losses without overheating.As a precaution, make sure the supply current is kept at 1.8mA.A voltage of 18V is output by this device.
MCP14E11-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.12W
MCP14E11-E/P Applications
There are a lot of Microchip Technology MCP14E11-E/P gate drivers applications.
- Power factor correction (PFC) circuits
- High frequency line drivers
- Digitally controlled power supplies
- Welding
- Pulse transformer drivers
- Video amplifiers
- DC-DC Converters
- Multicolor LED/laser displays
- Commercial and agricultural vehicles (CAV)
- Commercial air-conditioning (CAC)