MCP1407-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP1407 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 25mV |
| Max Output Current | 6A |
| Nominal Supply Current | 250μA |
| Output Current | 6A |
| Max Supply Current | 250μA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.065 μs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.065 μs |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP1407-E/SN Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.Gate drivers is mounted in the way of Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as the input type in this program.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP1407.The device is mounted using Surface Mount.During design, it is configured with 8 pins.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.As a maximum, there is 6A limit to the output current.This subcategory of MOSFET Drivers has a number of useful electronic components.Components with 8 pins are available.The basis of this system consists of 1 outputs.Mosfet driver supports an output current of 6A.To increase stability, keep the supply current at 250μA.25mV is the output voltage.
MCP1407-E/SN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1407-E/SN Applications
There are a lot of Microchip Technology MCP1407-E/SN gate drivers applications.
- High power buffers
- High-voltage isolated DC-DC converters
- Telecom switch mode power supplies
- Motor controllers
- Commercial and agricultural vehicles (CAV)
- Solar power supplies
- Commercial air-conditioning (CAC)
- Isolated switch mode power supplies (SMPS)
- A/D drivers
- Power factor correction (PFC) circuits