MCIMX6U1AVM10AD
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Package / Case | 624-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tray |
| Series | i.MX6DL |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 624 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PBGA-B624 |
| Supply Voltage-Max (Vsup) | 1.5V |
| Supply Voltage-Min (Vsup) | 1.4V |
| Speed | 1GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A9 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 2.8V 3.3V |
| Ethernet | 10/100/1000Mbps (1) |
| Number of Cores/Bus Width | 2 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR2, LVDDR3, DDR3 |
| USB | USB 2.0 + PHY (4) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC, Tamper Detection |
| Display & Interface Controllers | Keypad, LCD |
| Height Seated (Max) | 1.6mm |
| Length | 21mm |
| RoHS Status | ROHS3 Compliant |
MCIMX6U1AVM10AD Overview
The microprocessor is convenient for international shipping since it is packaged in 624-LFBGA. Advanced packaging method Tray is used to provide high reliability. The CPU has 2 Core 32-Bit cores/Bus width. The operating temperature around -40°C~125°C TJ should be understood. The cpu microprocessor belongs to the i.MX6DL series. Core-wise, this CPU has a ARM? Cortex?-A9 processor. The CPU uses LPDDR2, LVDDR3, DDR3 RAM controllers. This microprocessor features interfaces CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, UART. The CPU runs at 1.8V 2.5V 2.8V 3.3V when it comes to I/O. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Total terminations are 624. A maximum supply current of 1.5V is available. There is a wide width of 64 on the external data bus of this CPU.
MCIMX6U1AVM10AD Features
ARM? Cortex?-A9 Core
MCIMX6U1AVM10AD Applications
There are a lot of NXP USA Inc. MCIMX6U1AVM10AD Microprocessor applications.
- Hearing aids
- Safety -airbags, automatic braking system (ABS)
- Light sensing & controlling devices
- Copiers
- Leakage current tester
- Auto-breaking system
- PDAs, game consoles
- Projector
- Blood pressure monitors
- Electrocardiogram (EKG)