MCIMX514AJM6CR2
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Package / Case | 529-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | i.MX51 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 529 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PBGA-B529 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.1V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 600MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM® Cortex®-A8 |
| Voltage - I/O | 1.2V 1.875V 2.775V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 (3), USB 2.0 + PHY (1) |
| Additional Interfaces | 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keypad, LCD |
| Height Seated (Max) | 1.6mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
MCIMX514AJM6CR2 Overview
Since the microprocessor is packed in 529-LFBGA, shipping overseas is convenient. Using advanced packaging techniques Tape & Reel (TR), high reliability is ensured. Cores/Bus width is 1 Core 32-Bit. Recognize operating temperatures around -40°C~125°C TJ. It comes from the i.MX51 series. A ARM? Cortex?-A8 processor is present in this CPU. It has LPDDR, DDR2 RAM controllers. With its 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART interfaces, this microprocessor will be able to serve you better. 1.2V 1.875V 2.775V 3.0V is the I/O speed of this CPU. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR CIRCUIT. The total number of terminations is 529. Turning on and running the embedded microprocessor with a 1V voltage supply should be possible. A maximum supply current of 1.1V is available. Typical Graphics Processors cpu microprocessor. Datasheets specify that the embedded microprocessor requires 1.2V power supplies.
MCIMX514AJM6CR2 Features
ARM? Cortex?-A8 Core
MCIMX514AJM6CR2 Applications
There are a lot of NXP USA Inc. MCIMX514AJM6CR2 Microprocessor applications.
- Air fryers
- Laminators
- Gas monitoring systems
- Electronic jamming systems
- Kindle
- Industrial robot
- Computed Tomography (CT scan)
- Security systems
- Embedded gateways
- Oil and gas