MCIMX513CJM6C
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Package / Case | 529-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~95°C TC |
| Packaging | Tray |
| Published | 2008 |
| Series | i.MX51 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 529 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX513 |
| JESD-30 Code | S-PBGA-B529 |
| Supply Voltage-Max (Vsup) | 1.1V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 600MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM® Cortex®-A8 |
| Voltage - I/O | 1.2V 1.875V 2.775V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 (3), USB 2.0 + PHY (1) |
| Additional Interfaces | 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keypad, LCD |
| Height Seated (Max) | 1.6mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
MCIMX513CJM6C Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 529-LFBGA. High reliability can be achieved by using the advanced packaging method Tray. The CPU has 1 Core 32-Bit cores/Bus width. It is important to understand the operating temperature around -40°C~95°C TC. In the series i.MX51, it is found. With a core count of ARM? Cortex?-A8, this CPU is multicore. There are LPDDR, DDR2 RAM controllers on this CPU. This microprocessor is equipped with an interface of 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART. 1.2V 1.875V 2.775V 3.0V is the I/O speed of this CPU. uPs/uCs/Peripheral ICs are a MICROPROCESSOR CIRCUIT. Use MCIMX513 when searching for variants of the embedded microprocessor. To date, there have been 529 terminations. The microprocessor should be turned on and run with a voltage supply of 1V volts. The maximum supply current is 1.1V. As a typical Graphics Processors, this cpu microprocessor has Graphics Processors display. According to datasheets, the micro processor requires 1.2V power sources.
MCIMX513CJM6C Features
ARM? Cortex?-A8 Core
MCIMX513CJM6C Applications
There are a lot of NXP USA Inc. MCIMX513CJM6C Microprocessor applications.
- PDAs, game consoles
- Dishwashers
- Blenders
- Tape drives
- Data acquisition and control
- Automatic staplers
- Embedded gateways
- Computed Tomography (CT scan)
- Virtual reality VR robots
- Electromechanical control