MCIMX286CVM4BR2
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | i.MX28 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX286 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.55V |
| Power Supplies | 1.41.8V |
| Supply Voltage-Min (Vsup) | 1.35V |
| Speed | 454MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LVDDR, LVDDR2, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Co-Processors/DSP | Data; DCP |
| Security Features | Boot Security, Cryptography, Hardware ID |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Height Seated (Max) | 1.37mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
MCIMX286CVM4BR2 Overview
The embedded microprocessor has been packed in 289-LFBGA for convenient overseas shipping. A high level of reliability is provided by using an advanced packaging method Tape & Reel (TR). There are 1 Core 32-Bit cores per bus width on the CPU. Identify the operating temperature around -40°C~85°C TA. This is part of the i.MX28 series. The CPU is cored by a processor with a number of 0 cores. A total of LVDDR, LVDDR2, DDR2 RAM controllers are used by this CPU. This microprocessor features CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces to better serve its users. As far as I/O is concerned, this CPU runs at 1.8V 3.3V. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. MCIMX286 is a good way to search for variants of the microprocessor. As a whole, there are 289 terminations. There are 32 bits in its architecture. The supply voltage should not exceed 1.55V. A typical Microprocessors embedded microprocessor. There is a clock frequency of 24MHz on the microprocessor. As specified in datasheets, the embedded microprocessor requires 1.41.8V power supplies.
MCIMX286CVM4BR2 Features
ARM926EJ-S Core
32-Bit Structure
MCIMX286CVM4BR2 Applications
There are a lot of NXP USA Inc. MCIMX286CVM4BR2 Microprocessor applications.
- Automatic staplers
- Digital TVs
- Microwave ovens
- Accu-check
- Hearing aids
- Electrocardiogram (EKG)
- Printers
- Oscilloscopes
- Oil and gas
- Petrochemical