MCIMX251AJM4A
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | i.MX25 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX251 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Power Supplies | 1.2/1.51.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection |
| Display & Interface Controllers | Keypad |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
MCIMX251AJM4A Overview
The embedded microprocessor ships overseas conveniently packed in 400-LFBGA. High reliability is achieved using advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. Be aware of the operating temperature around -40°C~85°C TA. The i.MX25 series contains it. Core-wise, this CPU has a ARM926EJ-S processor. It has LPDDR, DDR, DDR2 RAM controllers. The microprocessor features interfaces CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART for better service. At 2.0V 2.5V 2.7V 3.0V 3.3V, the CPU runs its I/O. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. MCIMX251 is a good way to search for variants of the microprocessor. Total terminations are 400. In the case of a 1.45V voltage supply, the embedded microprocessor should be turned on and run. This microprocessor has an architecture of 32 bits. It can supply a maximum current of 1.52V. A typical Microprocessors embedded microprocessor. 16 is the width of the external data bus on this CPU. There is a clock frequency of 24MHz on the microprocessor. According to its datasheet, this micro processor requires 1.2/1.51.8/3.3V power supplies.
MCIMX251AJM4A Features
ARM926EJ-S Core
32-Bit Structure
MCIMX251AJM4A Applications
There are a lot of NXP USA Inc. MCIMX251AJM4A Microprocessor applications.
- Sonography (Ultrasound imaging)
- Home appliances
- Glucose monitoring systems (for Type 1 Diabetes)
- Metering & measurement field
- Refrigerators
- Data acquisition and control
- Dryers
- Day to day life field
- Nintendo
- Copiers