MC74VHCT74ADTR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 140MHz |
| Family | AHCT/VHCT/VT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 80 MHz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MC74VHCT74ADTR2 Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74VHCT series. A frequency of 140MHzshould be the maximum output frequency. In total, it contains 2 elements. There is 2μA quiescent consumption. Terminations are 14. It is powered from a supply voltage of 5V. A 4pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as AHCT/VHCT/VT. It reaches the maximum supply voltage (Vsup) at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V.
MC74VHCT74ADTR2 Features
Tape & Reel (TR) package
74VHCT series
MC74VHCT74ADTR2 Applications
There are a lot of Rochester Electronics, LLC MC74VHCT74ADTR2 Flip Flops applications.
- Shift registers
- Computing
- Instrumentation
- Communications
- Buffered Clock
- Parallel data storage
- Single Up Count-Control Line
- Pattern generators
- ATE
- Shift Registers