MC74VHCT574ADTG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
MC74VHCT574ADTG Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. A package named Tubeincludes it. As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at -40°C~85°C TA. This electronic flip flop is of type D-Type. The 74VHCTseries comprises this type of FPGA. Its output frequency should not exceed 130MHz Hz. The element count is 1 . There is a consumption of 4μAof quiescent energy. There are 20 terminations,If you search by 74VHCT574, you will find similar parts. The power supply voltage is 5V. JK flip flop input capacitance is 4pF farads. An electronic device belonging to the family AHCT/VHCTcan be found here. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliability, this D flip flop is ideally suited for RAIL. The power supply is 5V. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be kept at 5V. In order to operate, the chip has 3 output lines.
MC74VHCT574ADTG Features
Tube package
74VHCT series
20 pins
8 Bits
5V power supplies
MC74VHCT574ADTG Applications
There are a lot of ON Semiconductor MC74VHCT574ADTG Flip Flops applications.
- Modulo – n – counter
- Bounce elimination switch
- Memory
- Latch
- Differential Individual
- QML qualified product
- Automotive
- Pattern generators
- Safety Clamp
- ESD performance